The Biological research of wood and it’s renewable material is what is referred to as wood science. Wood technology is now the way the tools are utilized in the processes of wood preservation. Wood is treated as a material in direct comparison with other products. Materials properties, ease of it being worked on and its value are among the few properties which are compared against those of wood and other materials. The many Merits of timber and these technologies improve wood to be superior over other products. Wood can be applied in very many applications, and this gives it an upper hand over other materials. Once a tree has been cut down another can be planted in the same spot. All the parts of wood can be put into use, and this makes it a better fit than other materials which most of their byproducts are a waste.
For your wooden products and house to stay for long and have a good appearance it needs to be protected. Wooden structures have to be kept away from water and pests that eat through the wood. The rotting and decay of the timber products are caused by the moisture and the insects. There are many ways timber is treated among them being the ACQ in other words alkaline copper Quaternary. This is a copper-based preservative that is applied to the wood for protection. As effective as this preservative, it has some downside to its use. It has been seen corroding most metals for example aluminum in less than six months of its application. The concentration of the chemical that will be used to treat a piece of wood will depend on the where it is going to be used and the molecular structure of the wood. Timber being used around a water body will be dipped in a more saturated fluid than that being used above ground.
The use of copper metal is another method of wood treatment that is fast being accepted. The use of this method is fast being accepted because it is not corroding the metal fasteners. An alternative name to be given to this method is the micronized copper wood preservative method. In this process microscopic particles of solid copper metal are mixed in a liquid carrier and injected to the wood at high pressure. In other copper-based preservation methods copper is dissolved in chemicals while in this method copper is driven into the wood as a metal. When this process is used to treat timber the timber properties are increased highly. The timber treated in this way is used in both outdoor and indoor frames that last very long.
The micronized copper preservative has proven to be highly effective in protecting the wood against fungal decay and termites. Unlike other methods of treatment this method is not corrosive. The wood treated using this method last longer and is stronger.